Section 11-G602. DENSITY - FLOOR AREA RATIO (FAR)  


Latest version.
  • 602.1 The maximum permitted FAR of buildings in the MU-15 through MU-22 zones shall be as set forth in the following table:

     

    TABLE G § 602.1: MAXIMUM PERMITTED FLOOR AREA RATIO

     

    Zone

    Maximum FAR

    Total Permitted

    Maximum 

    Non-Residential Use

    MU-15

    4.0

    2.5

    4.8 (IZ)

    MU-16

    6.0

    3.5

    7.2 (IZ)

    MU-17

    2.5

    1.5

    3.0 (IZ)

    MU-18

    3.5

    1.5

    4.2 (IZ)

    MU-19

    6.0

    2.0

    7.2 (IZ)

    MU-20

    5.0

    4.0

    6.0 (IZ)

    MU-21

    6.5

    6.5

    7.8 (IZ)

    MU-22

    6.0

    3.0

    7.2 (IZ)

    602.2 In the MU-17 and MU-18 zones, an existing building on a lot with an area ten thousand square feet (10,000 sq. ft.) or less, may have a maximum density of 2.0 FAR for non-residential uses, provided the uses are located in the ground story and the story directly above the ground story.

    602.3 In the MU-22 zone, combined lot development is permitted for the purposes of allocating gross floor area devoted to residential and non-residential uses in accordance with the provisions of Subtitle G § 100.4.  Both lots shall be located within the same square, and shall be zoned MU-22.

     

     

authority

§ 1 of the Zoning Act of 1938, approved June 20, 1938 (52 Stat. 797, as amended; D.C. Official Code § 6-641.01 (2012 Repl.)).

source

Final Rulemaking published at 63 DCR 2447, 2944 (March 4, 2016 – Part 2).