Section 11-G702. DENSITY - FLOOR AREA RATIO (FAR)  


Latest version.
  •  

    702.1The maximum permitted FAR of buildings in the MU-23 through MU-26 zones shall be as set forth in the following table:

     

    TABLE G § 702.1: MAXIMUM PERMITTED FLOOR AREA RATIO

     

    Zone

    Maximum FAR

    Total Permitted

    Maximum

    Non-Residential Use

    MU-23

    1.8

    N/A

    2.16 (IZ)

    MU-24

     

    1.8

    1.5

    2.16 (IZ)

    MU-25

    3.0

    3.0

    3.0 (IZ)

    MU-26

    2.5

    2.5

    2.5 (IZ)

     

    702.2 In the MU-24 zone, an existing building on a lot with an area ten thousand square feet (10,000 sq. ft.) or less may have a maximum density of 1.8 FAR for non-residential uses, provided the uses are located in the ground story and the story directly above the ground story.

    702.3 In the MU-25 and MU-26 zones, an existing building on a lot with an area ten thousand square feet (10,000 sq. ft.) or less may have a maximum density of 2.0 FAR for non-residential uses, provided the uses are located in the ground story and the story directly above the ground story.  

     

     

authority

§ 1 of the Zoning Act of 1938, approved June 20, 1938 (52 Stat. 797, as amended; D.C. Official Code § 6-641.01 (2012 Repl.)).

source

Final Rulemaking published at 63 DCR 2447, 2944 (March 4, 2016 – Part 2); as amended by Final Rulemaking published at 63 DCR 10932 (August 26, 2016); as amended by Final Rulemaking published at 64 DCR 22 (January 6, 2017).