D.C. Municipal Regulations (Last Updated: September 13, 2017) |
Title 11. ZONING REGULATIONS OF 2016 |
SubTilte 11-G. MIXED-USE (MU) ZONES |
Chapter 11-G9. FORT TOTTEN MIXED-USE ZONES – MU-28 AND MU-29 |
Section 11-G902. DENSITY - FLOOR AREA RATIO (FAR)
Latest version.
- 902.1 The maximum permitted FAR of buildings in the MU-28 and MU-29 zones shall be as set forth in the following table:
TABLE G § 902.1: MAXIMUM PERMITTED FLOOR AREA RATIO
Zone
Maximum FAR
Total Permitted
Maximum
Non-Residential Use
MU-28
4.0
2.5
4.8 (IZ)
MU-29
5.0
3.0
6.0 (IZ)
902.2 Density may be increased in the MU-28 and MU-29 zones in an existing building on a lot with an area ten thousand square feet (10,000 sq. ft.) or less, and it may have a maximum density of 2.0 FAR for non-residential uses, provided the uses are located in the ground story and the story directly above the ground story.
902.3 In the MU-29 zone, combined lot development is permitted for the purposes of allocating gross floor area devoted to residential and non-residential uses in accordance with the provisions of Subtitle G § 100.4. Both lots shall be located within the same square and shall be zoned MU-29.
authority
§ 1 of the Zoning Act of 1938, approved June 20, 1938 (52 Stat. 797, as amended; D.C. Official Code § 6-641.01 (2012 Repl.)).
source
Final Rulemaking published at 63 DCR 2447, 2944 (March 4, 2016 – Part 2).