Section 11-K402. DENSITY - FLOOR AREA RATIO (FAR) (HE)

402.1 The maximum permitted FAR of buildings in HE zones shall be given in the following table:

TABLE K § 402.1:  MAXIMUM PERMITTED FAR

 

HE Sub-district	Maximum FAR
HE-1 (19th St.)	3.0
HE-2 (20th St.)	4.8
HE-3 (Water St.)	7.2
HE-4 (Corrections)	6.0
Square  E (Park)	0.2

402.2 The following density limitations on non-residential uses apply within the HE zones, but only in the squares listed below:

TABLE K § 402.2:  MAXIMUM FAR FOR NON-RESIDENTIAL USES

 

Square	Maximum Non-residential FAR
F	0.8
G	1.0
H	0.5
I	3.0

402.3 The matter-of-right FAR shall serve as the maximum permitted height and floor area ratio for a planned unit development (PUD).

402.4 The minimum lot area for row dwellings shall be eighteen hundred square feet (1,800 sq. ft.) with a minimum lot width of eighteen feet (18 ft.).

 

 

authority

§ 1 of the Zoning Act of 1938, approved June 20, 1938 (52 Stat. 797, as amended; D.C. Official Code § 6-641.01 (2012 Repl.)).

source

Final Rulemaking published at 63 DCR 2447, 3176 (March 4, 2016 – Part 2).