Section 20-599. DEFINITIONS AND ABBREVIATIONS

Latest version.

599.1The meanings ascribed to the definitions and abbreviations appearing in §§ 199.1 and 199.2 respectively of Chapter 1 shall apply to the terms and abbreviations in this chapter.

APPENDIX 5-1
TEST METHODS FOR SOURCES OF VOLATILE ORGANIC COMPOUNDS
	Source Category	EPA Document No.	Control Option	Test Method1
	Bulk gasoline terminals	EPA-450/2-77-026	Add-on2	Methods 25A, 25B, 2A, 2B Leak tests per methods in EPA-450/2-78-051
	Bulk plants	EPA-450/2-77-035	Vapor balance system3 equipment specifications and operating procedures	Equipment inspection per methods in EPA-450/2-77-035, page 6-3
	Cutback asphalt	EPA-450/2-77-037	Water emulsion Emulsion solvent content	Direct observation by inspector ASTM Distillation Test D-244
	Degreasing	Not Applicable	Low volatility VOC solvents Low or no VOC content solvents	ASTM Method D-2879-86 Method 24
	Degreasing	EPA-450/2-77-022	Equipment specifications and operating procedures	Per methods in EPA-450/2-77-022, pages 3-31, 3-33, 3-35, and 7-1 to 7-7
			Add-on2
	External floating roof tanks	EPA-450/2-78-047	Inspection, maintenance and monitoring	Per methods in EPA-450/2-78-047, pages 5-1 to 5-4
	Fixed-roof tanks	EPA-450/2-77-036	Internal floating roof4 equipment specifications and maintenance requirements	Per methods in EPA-450/2-77-036, page 6-2
			Add-on2	Method 25
	Gasoline tank trucks	EPA-450/2-78-051	Pressure-vacuum test Inspection, maintenance and monitoring	Method 27 or methods in EPA-450/2-78-051, Appendix B Leak tests per methods in EPA-450/2-78-051 Appendix B
	Graphic arts: rotogravure and flexography	EPA-450/2-78-033	Low solvent inks, high solids inks	Method 24 or 24A
			Add on2	Method 25
	Graphic Arts: Offset Lithography	Not Applicable	Add-on2 Low volatility VOC cleaning solutions Low VOC content cleaning solutions Dampening solution	Method 25 or 25A ASTM Method D-2879-86 Method 24 Method 415.1
	Manufacture of high density polyethylene, polypropylene and polystyrene	EPA-450/3-83-008	Add on2	Method 18, 25 or 25A
	Natural gas/gasoline processing plants	EPA-450/3-83-007	Inspection, maintenance and monitoring	Method 21
	Petroleum dry cleaners	EPA-450/3-82-009	Operation and maintenance	Per methods in EPA-450/3-82-009, Appendix E
			Add-on2	Method 25
	Petroleum refinery equipment leaks	EPA-450/2-78-036	Inspection, maintenance and monitoring	Method 21
	Petroleum refinery vacuum producing systems, wastewater separators and process unit turnarounds	EPA-450/2-77-025	Equipment specifications and operating procedures	Per methods in EPA-450/2-77-025, page 6-2
	Perchloroethylene dry cleaners	EPA-450/2-78-050	Operation and maintenance	Per methods in EPA-450/2-78-050, pages 6-1 to 6-4
			Add-on2
	Pharmaceutical manufacture	EPA-450/2-78-029	Operation and maintenance	Per methods in EPA-450/2-78-029, page 7-2
			Add-on2	Method 25
	Rubber tire manufacture	EPA-450/2-78-030	Add-on2	Method 25
	Service stations-Stage I	Design criteria document	Vapor balance system3 equipment specifications operating and procedures	Equipment inspection per methods in Design Criteria Document, pages 3 to 6 Leak tests per methods in EPA-450/2-78-051
	Surface coating of cans, metal coils, paper, fabric, and automobiles and light-duty trucks	EPA-450/2-77-008	Low solvent coatings	Method 24
			Add-on2	Method 25 or methods in EPA-450/2-78-041
	Surface coating of flatwood paneling	EPA-450/2-78-032	Low solvent coatings	Method 24 or methods in EPA-450/2-78-032, page 5-1
			Add-on2	Method 25
	Surface coating of large appliances	EPA-450/2-77-034	Low solvent coatings	Method 24 or methods in EPA-450/2-77-034 pages 5-1 to 5-4
			Add-on2	Method 25 or methods in EPA-450/2-78-041
	Surface coating of magnetic wire	EPA-450/2-77-033	Add-on2	Method 25 or methods in EPA-450/2-78-041
	Surface coating of metal furniture	EPA-450/2-77-032	Low solvent coatings	Method 24 or methods in EPA-450/2-77-032, pages 5-1 to 5-5
			Add-on2	Method 25 or methods in EPA-450/2-78-041
	Surface coating of miscellaneous metal parts and products	EPA-450/2-78-015	Low solvent coatings	Method 24 or methods in EPA-450/2-78-015, page 6-1
			Add-on2	Method 25
	Synthetic organic chemicals manufacturing industry (SOCMI) equipment leaks	EPA-450/3-83-006	Inspection, maintenance and monitoring	Method 21
	Synthetic organic chemicals manufacturing industry (SOCMI) air oxidation unit processes		Add-on2	Method 18
	Volatile organic liquid storage vessels		Inspection, maintenance and monitoring

1Methods refer to those found in Appendix A to Part 60 of Title 40 of the Code of Federal Regulations unless otherwise noted.

2Add-on refers to emission control equipment, e.g. incineration, carbon adsorption, refrigeration, refrigeration/compression/absorption, etc.

3Visual inspection except for leaks.

4Visual inspections only.

source

Section 2 of the Air Pollution Control Act of 1984 National Ambient Air Quality Standards Attainment Amendment Act of 1993, D.C. Law 10-24, 40 DCR 5474, 5479 (July 30, 1993); as amended by Final Rulemaking published at 45 DCR 7037 (October 2, 1998).

                    
                        var val = document.getElementById('citecontent').innerHTML;
                        art.dialog.defaults.title = window.location.href;
                        art.dialog.data('cite', val);
                        art.dialog.data('homeDemoPath', '/Scripts/plus/artDialog/');
                        art.dialog.open('/Scripts/plus/artDialog/citeiframe.html');