D.C. Municipal Regulations (Last Updated: September 13, 2017) |
Title 24. PUBLIC SPACE AND SAFETY |
Chapter 24-5. VENDORS |
Section 24-547. DESIGN STANDARDS: VENDING STANDS
-
547.1The design and operation of all vending stands shall conform with the following requirements, unless otherwise authorized by the DCRA Director on the Vending Site Permit:
(a)The stand shall consist of a wood, plastic, or metal table with attached folding legs, a stair-stepped structure approved by the DCRA Director, or a shoe-shine stand structure approved by the DCRA Director. If the stand or structure is made of wood, the wood shall consist of weather-resistant lumber with two (2) coats of varnish or non-toxic paint;
(b)The stand shall not exceed a maximum horizontal surface area of seven feet by four feet six inches (7 ft. x 4 ft. 6 in.);
(c)The surface area of the table (or the highest surface area of the stair stepped structure) shall be at a height of between one foot (1 ft.) and four and a half feet (4.5 ft.);
(d)The stand shall have a canopy that shall not exceed seven feet nine inches by five feet three inches (7 ft. 9 in. x 5 ft. 3 in.) and shall be comprised of water-resistant canvas or six (6) ply polyurethane material covering a metal or wood frame mounted above the stand. The uppermost point of the canopy shall not exceed more than nine feet (9 ft.) in height and the lowest point on the canopy, inclusive of any canopy flap, shall not be less than seven feet (7 ft.) in height, measured from the sidewalk pavement. The canopy shall be clean and in good repair;
(e)A skirt or tablecloth shall be attached to the table surface on all sides and shall extend from the table surface to no more than one inch (1 in.) from the sidewalk pavement. The skirt shall be clean and in good repair; and
(f)No free standing racks or other free-standing forms of display shall be allowed around the stand.